Nitek ER16500U - Manual

INSTALLATION GUIDE
NITEK
®
De Schans 19-21 2a
8231 KA Lelystad
Tel: +31(0)320-230005
E-mail: [email protected]
WWW.NITEK.NL
USA
5410 Newport Drive, # 24
Rolling Meadows, IL 60008
Phone: (847) 259-8900
Fax: (847) 259-1300
E-mail: [email protected]
WWW.NITEK.NET
E
U
R
O
P
E
16 Port IP Video Extender Over UTP
With Built-In Gigabit PoE Switch with
EtherStretch
ER16500U
The ER16500U is another component of the NITEK cutting edge EtherStretch line. Our EtherStretch solu-
tion allows for the utilization of existing cable infrastructure (coax or UTP) to transmit data from IP cameras
and other network devices along with power (PoE & PoE+) to operate these networked devices over the
given copper media well over the 100 meter or 328 feet networking distance limitation.
The ER16500U is a Ethernet & PoE extending rack mounted sixteen port, power sourcing receiver unit with
built-in Gigabit switching capabilities. The unit requires very little installation time and absolutely no set up
or configuration. Independently the ER16500U will work as a Layer 2 PoE+ switch. Additionally, the
ER16500U and associated ET1500U transmitters (up to 16) can quickly turn ordinary CAT5e/CAT6 UTP
cables into a series of high speed network communication and PoE pathways. The ER16500U is a fully
functional Layer 2 PoE+ network switch with a 802.3AT power output on each of the sixteen network ports
and can operate with any standard Ethernet device up to 100m. Additionally, when used with the ET1500U
transmitters the system allows for cable runs of up to 600m/2000ft supplying both a network connection and
PoE+ power.
The ER16500U is completely transparent to the network thus requiring no IP and MAC addressing. Simply
connect your network devices to the transmitter LAN ports along with the existing cables to the receiver and
the system quickly begins communicating. LED indicators show the status and data speed of network com-
munications along with PoE power confirmation.
The NITEK EtherStretch ER16500U extends network communications to overcome cable distance limita-
tions offering connectivity to devices in locations traditional networking does not allow. The ER16500U is
ideal for retro-fitting existing installations or for use in lieu of fiber for long distance transmission with the
additional PoE over the link capability. The rack mounted unit is robustly constructed of molded steel casing
with appropriate built in cooling and ventilation.
Description
IEC/UL 60950-1
Patent Pending