Nitek ET1551U - Manual (Page 7)

Troubleshooting
PROBLEM POSSIBLE CAUSE
No video/data
Check camera, ET1551U & Multi-port receiver device connections.
Check Single Twisted Pair wire condition and connectors.
Check that the camera is powered.
Check that supplied camera power meets manufacturer’s specifications.
Check that cable distances do not exceed PoE capabilities.
Max. total distance of 1600ft (500m).
Check that Single Twisted Pair wire does not exceed the Ethernet data
transmission operating distances of the ET1551U & multi-port receiver.
Check link & device status. Max. total distance of 1600ft (500m).
Video/data loss
Check network switch terminations & link status.
Check network routing table(s).
Confer with site Network Administrator
For Tech Support Call 1-(800)528-4343 (USA)
1-(847)259-8900 (Other)
www.nitek.net
Technical Specifications
Network Transmission Device
Network
Port RJ45 Connector
Link
Port Screw Terminal
Ethernet
Auto Configuring 10/100 Full Duplex
LED Indicators
Link Status, Power, PoE out, 10Mb or 100Mb
PoE Compliance
IEEE 802.3af & IEEE 802.3at
Max Operating Distance
1,640ft /500m
Power Draw per Device
1.5 Watts
UTP Cable Specifications
DC Loop Resistance 51 Ohms/1000feet (max) (51 Ohms/304 meters)
Normal Capacitance 17pF/ft.
Impedance 100 Ohms +/- 20%
UTP Category 2 or better
Rating/Listing
UL
IEC/UL 60950-1
NEMA TS-2 Temperature & Humidity NEMA 2.2.7
Mechanical Vibration NEMA 2.2.8
Mechanical Shock NEMA 2.2.9
Operating Voltage NEMA 2.1.2
Operating Frequency NEMA 2.1.3
Transient Test NEMA 2.1.6 thru 2.1.8
Operating Temperature
-40° to 75° C / -40° to 167° F
Humidity
Up to 95% non-condensing
Dimensions
1.1” x 1.6” x 4.6” including tabs
Shipping Dimensions
8” x 3” x 2”
Shipping
Weight 2 lbs