Nitek ET4500C - Manual (Page 7)

Technical Specifications
Troubleshooting
PROBLEM POSSIBLE CAUSE
No video/data
Check camera and ET4500C device connections.
Check coax cable condition and BNC connectors.
Check that the camera is powered.
Check that supplied camera power meets manufacturer’s
specifications.
Check cable that cable distances do not exceed PoE
capabilities. Refer to chart on page 6.
Check that coax cable does not exceed the Ethernet data
transmission operating distances of the ET4500C.
Check link & device status. See chart on page 6.
Video/data loss
Check network switch terminations & link status.
Check network routing tables.
Confer with site Network Administrator
For Tech Support Call 1-(800)528-4343
Network Transmission Device
Network Port Four RJ45 Jacks
Link Port BNC Coax Jack
Ethernet Auto Configuring 100BASE-TX Full Duplex
Power Connector 2.5mm (ID) x 5.5mm (OD) Barrel
LED Indicators Link Status, Power, PoE out, 10Mb or 100Mb
PoE Compliance IEEE 802.3af & IEEE 802.3at
Max Operating Distance 1,640ft /500m
PoE Output 45 Watts total output power
With a 1A/48Vdc included power supply
DC Voltage Input 48 to 56Vdc, 1 to 5A
Operating Temperature -40° to 75° C / -40° to 167° F
Humidity Up to 95% non-condensing
Dimensions 1.0” x 4.0” x 4.9” including tabs & BNC
(25 x 102 x 124mm)
Mounting Hole 0.20” Diameter (5.0mm)
Shipping Dimensions
3.0” x 6.9” x 9.7” (76 x 175 x 246mm)
Shipping Weight 2.0lbs (0.91kg)