Nitek ET4500C User Manual
Nitek, Installation guide, Et4500c
NITEK
®
De Aar 99
8253 PN Dronten
The Netherlands
Tel: +31(0) 321 310 043
E-mail: [email protected]
WWW.NITEK.NET
USA
5410 Newport Drive, # 24
Rolling Meadows, IL 60008
Phone: (847) 259-8900
Fax: (847) 259-1300
E-mail: [email protected]
WWW.NITEK.NET
EUROPE
The ET4500C is another component of the NITEK EtherStretch line. This Environmentally Hard-
ened EtherStretch solution allows for the utilization of existing coax cable infrastructure to trans-
mit data from IP cameras and other network devices. The ET4500C along with data can provide
the power (PoE) to operate these network devices well beyond standard network limitations. The
system can extend Ethernet to over 500m or 1640ft of coaxial cable making the ET4500C is ideal
for retrofitting existing installations.
The ET4500C is a 4 channel transmitter that mates with any of the EtherStretch Multi-port series
receiver units and require very little installation time and no set up or configuration. This system
quickly turns any ordinary RG59 coax cable into a high speed network communication and PoE
pathway. The ET4500C is completely transparent to the network thus requiring no IP and MAC
addressing. Simply connect your network devices to the networking ports of the ET4500C trans-
mitter and associated receiver along with existing cabling and the system begins communicating.
LED indicators show the status and speed of network communications and PoE power.
The NITEK EtherStretch ET4500C reliably extends network communications to overcome cable
distance limitations offering connectivity to devices in locations traditional networking does not
allow. The units are constructed of industrial grade RoHS compliant plated aluminum with a cor-
rosion resistant finish makes them extremely durable.
INSTALLATION GUIDE
ET4500C
IP Video Camera Over Coax
Description
RoHS
COMPLIANT
2002/95/EC
04242014
Patent Pending