Detroit Radiant Products Company SV Series - Manual (Page 21)

Tube Heater General Manual
21
3.0 Installation • Reflector Assembly
Elbow Reflector* 90° bend, highly polished aluminum reflector elbow RE
designed to fit atop one elbow accessory fitting.
U-Reflector* 180° bend, highly polished aluminum reflector U-bend RU
designed to fit atop one U-bend accessory fitting.
Side Shield Extension** Highly polished side shield extension used to direct SSE
infrared rays downward, away from sidewalls and combustibles.
Protective Guard Used to prevent debris or objects from becoming lodged PG
between the radiant tube and reflector. Required when
mounting heaters below 8 ft..
Chart 3.5
Common Optional Accessories
Reflector Accessory Description Part Number
* Reflectors cannot be rotated when used with a reflector elbow (RE), U-shaped reflector (RU), or
side shield (SSE).
** Refer to the Clearance to Combustible chart in the Series Insert Manual for minimum distances to
combustibles when side shield extension(s) are used.
Additional accessory options are listed in the Detroit Radiant Products Company Tube Heater Accessory
Guide or online at
www.detroitradiant.com.
Figure 3.18 • Reflector Shield Accessories
Side shield extension (P/N: SSE)
Directs infrared rays downward,
away from sidewalls and combustibles.
Elbow reflector (P/N: RE)
Used over a 90-degree
elbow accessory fitting.
U-shaped reflector (P/N: RU)
Used over a U-bend
accessory fitting.