Alamo 284 - Manual (Page 93)

OPERATION
260/272/284 01/11 Operation Section 4-41
© 2011 Alamo Group Inc.
OPERA
T
ION
Always shut the Tractor completely down, place the transmission in park, and set the
parking brake before you or anyone else attempts to connect or disconnect the Implement
and Tractor hitches.
(S3PT-15)
To disconnect the mower, first extend the tractor 3-
point hitch top link to remove tension on the top link
hitch pin. When the pin is loose and easy to rotate,
remove the pin from the mower. Next remove both
lower hitch pins.
After disconnecting the 3 lift points, remove the
mower driveline from the tractor PTO shaft. Lay
the driveline down carefully on support flat to avoid
damaging the driveline or its shield. Do not let the
driveline fall into mud or dirt, which can
contaminate the bearing and shorten the life of the
driveline. OPS-R-0031_B