4 blade bolt inspection, Blade bolt inspection -26, Operation – Alamo 284 User Manual
Page 78: Opera t ion
OPERATION
260/272/284 01/11
Operation Section 4-26
© 2011 Alamo Group Inc.
OPERA
T
ION
8.4 Blade Bolt Inspection
Inspect Blade Bolt Head daily for wear as followed:
Inspect the Blade Bolt Heads daily for abnormal wear. REPLACE BOTH BLADE BOLTS on
the Blades IMMEDIATELY if either blade bolts has:
•
Visible cracks or
•
If the recessed area on blade bolt is worn off or
•
If Blade Bolt has gouges or chipped areas.
Failure to replace abnormally worn blade bolts may lead to catastrophic failure of the blades and ejection of
the broken part which may cause serious bodily injury or death.
Always replace Blade Bolts with new bolts whenever replacing the Blades. OPS-U-0037