Hydraulic or manual lift (model 284 only), Wheels (model 284 only), Assembly – Alamo 284 User Manual

Page 47: Assembl y

Text mode
Original mode

ASSEMBLY

260/272/284 01/11

Assembly Section 3-7

ASSEMBL

HYDRAULIC OR MANUAL LIFT (Model 284 Only)

Install the Hydraulic Cylinder or the manual Ratchet Lift Screw (Asm-0039) between the Axle Center Lug and
the Lug directly behind the Center Gearbox. Install cylinder pins provided and retain with cotter pins. NOTE:
Figure ASM-0038 shows optional spring shock installation.

WHEELS (Model 284 Only)

Install the Wheels on the Wheel Hubs. Note: If Laminated Tires are used, place the flat side of the Lug Nut
against the Wheel Asm-R-0127. Note direction of travel and curvature of rubber segments in tire and install as
shown in Asm-R-0127.

This manual is related to the following products:

260 272