beautypg.com

Locknut worn out. replace locknut, Rough gears. run in or change gears, Worn bearing. replace bearing – Alamo 284 User Manual

Page 99: Bent shaft. replace oil seal and shaft, Oil seal race rough. replace shaft or repair race, Oil seal installed wrong. replace seal, Of seal, Oil level too high. drain oil to proper level, Gasket damaged. replace gasket, Bolts loose. tighten bolts

Locknut worn out. replace locknut, Rough gears. run in or change gears, Worn bearing. replace bearing | Bent shaft. replace oil seal and shaft, Oil seal race rough. replace shaft or repair race, Oil seal installed wrong. replace seal, Of seal, Oil level too high. drain oil to proper level, Gasket damaged. replace gasket, Bolts loose. tighten bolts | Alamo 284 User Manual | Page 99 / 136 Locknut worn out. replace locknut, Rough gears. run in or change gears, Worn bearing. replace bearing | Bent shaft. replace oil seal and shaft, Oil seal race rough. replace shaft or repair race, Oil seal installed wrong. replace seal, Of seal, Oil level too high. drain oil to proper level, Gasket damaged. replace gasket, Bolts loose. tighten bolts | Alamo 284 User Manual | Page 99 / 136
This manual is related to the following products:
See also other documents in the category Alamo Gardening equipment: