Multichannel Systems Roboinject Manual - Manual (Page 68)

Roboinject Manual
64
The "Injection Halt" dialog appears.
Click "Break" to stop the test injection and the general injection process,
for example, if the injection needle is broken or clocked.
To control the ongoing injection process you have three possibilities:
Click "Continue" to continue with injection process.
Click "Cancel" to stop the injection process. The carrier and the injection mount
will automatically move to home position.
Click "Stop" to stop the injection process without any movement of carrier or z-axis.
This is useful in case of severe malfunctions which could possibly lead to damages
if further movements would be performed.