Multichannel Systems Roboinject Manual - Manual (Page 48)

Roboinject Manual
44
Defining the Samples
After setting up the "Sample Information” dialog, the samples of the tubes are fixed. To define
which well should be injected with which sample, please click onto the tube icon first, and then
onto the well icon. The color of the well will immediately change into the symbol color of the
sample of the selected tube. Choose another tube to assign one or several wells to that tube
sample respectively. It is possible to assign any well to any sample. Use the letters and digits
to correlate horizontal rows and vertical columns to the samples. Use the Roboinject icon
to select and deselect the sample of the complete well plate.