Multichannel Systems Roboinject Manual - Manual (Page 58)

Roboinject Manual
54
Opening a previously saved file
1. If you want to inject the same plate again or review previously injected cells,
open the appropriate well plate file.
2. Click "Open" on the "File" menu. The "Open" dialog box appears.
3. Select the Roboinject file (*.rpf) you want to open.
4. Click "Open". The well plate window now shows the status of the already saved plate;
and the Roboinject header shows the name of the actually opened file.
Defining the Injection Samples
1. The next step after creating a new file and well plate is the definition of the respective
injection samples inside of the 0.5 ml micro reaction tubes.
2. Click on the symbol of one of the sample reservoir tubes to open the “Sample
Information” dialog box. Please read also chapter "Sample Information" dialog.
Note: The sequence of injection is always from left sample to right sample. Please
keep this in mind if the injection sequence of samples is of importance for you.