Multichannel Systems Roboinject Manual - Manual (Page 39)

Roboinject
35
3.8 Control View
The "Control View" on the right side of the main window of the Roboinject software is divided
into two smaller windows: "Injection" and "Log" file.
In the "Injection" window the status LED indicates the status of the device. Green color indicates
a valid connection between Roboinject and computer, red color indicates no connection.
The "Start" and "Break" buttons start and interrupt the injection process. The status bar below
the buttons displays the injection proceeding during the injection run.
In the "Log" file window the injection process is documented.