Multichannel Systems STG3008-FA Manual - Manual (Page 61)

Synchronizing Events
55
10.3 Trigger Settings
Triggering output channels (Standard mode)
You can use the trigger input for triggering the output channel. The trigger settings are saved in
the currently active MC_Stimulus output file (*.stm). All eight analog output channels are assigned
to “Trigger 1” by default in the “Trigger Settings” dialog box in the “Edit” menu.
The “Multi-File” and the “Extended Multi-File” mode are not available in STG3008-FA.
Triggered action when channel(s) still active
You can define what action should be taken when any of the channels assigned to the trigger
are still active. Please click the expand button to show the advanced options:
Stop: A following trigger input stops the stimulation on the assigned channels if at least one
channel that has been assigned to this particular trigger is still active in the moment of the trigger
event. The trigger event starts stimulation only if no channel that has been assigned to this
trigger is active.
Restart: The stimulus protocols on all channels assigned to this trigger are started at the trigger
event, regardless of the activity on these channels.
Ignore: The trigger event is ignored when any channel assigned to this trigger is active. The
trigger event starts stimulation only if no channel that has been assigned to this trigger is active.