Multichannel Systems STG3008-FA Manual - Manual (Page 34)

STG3008-FA Manual
28
The absolute values of 200 and 200 are both 200. This absolute value of 200 is modified by the
shift factor of 50, resulting in 250. The negative value is now 250, and the positive value is 250.
(If you had chosen the option Shift instead, the computed result would have been 200 + 50 =
150.) All zero values are not changed.
Autocreating entries
You can use the Autofill feature to set up advanced time or voltage/current increments. You
define the Start and End value and either the Step Size (Start - Stop - Step Size) or the
number of Steps (Start - Stop - # of Steps). Alternatively, you can enter the Step Size and
the Number of Steps (Start - Step Size - # of Steps). According to these specifications,
rows are inserted and the column is filled automatically.
In the following example, the Autofill feature has been used to create a voltage step series
from 20 mV to 500 mV with an increment of 20 mV.
1. Click any Value or Time column header to select a column. The selected column is highlighted
in black.
2. Right-click and click Autofill.
3. Select one out of three commands and fill in the white text boxes.