Multichannel Systems STG3008-FA Manual - Manual (Page 37)

Programming Stimulus Protocols
31
6. You can click the Reset All button to set the level on all channels back to 100 percent.
Stimulus Intensity dialog box of the STG3008-FA
Channel 1 is set to 100 %, that is, the stimulus protocol will be downloaded onto the stimulus
generator as it was programmed in the worksheet. Channel 2 is set to 50 %, that is, all stimulus
amplitudes programmed on channel 2 are half, channel 3 is set to 150 %, and channel 4 is set
to 100 %,channel 5 and 6 are set to 200, that is, all stimulus amplitudes are doubled.