3 toolbar, 4 shortcut keys – Multichannel Systems STG3008-FA Manual User Manual
Page 56

STG3008-FA Manual
50
9.3 Toolbar
For your convenience, you will find some of the more commonly used commands as a button
on the toolbar.
New File
Creates a new MC_Stimulus II file (*.stm) file.
Open File
Opens a previously saved MC_Stimulus II file (*.stm) file.
Save File
Saves the *.stm file to the chosen destination.
Cut Row
Deletes selected row(s) and sends deleted row(s) to clipboard.
Copy Row
Sends selected row(s) to clipboard.
Paste Row
Pastes row(s) from clipboard and overwrites row(s) starting at the selected
row.
Prints active channel of active worksheet.
Information Opens the About dialog, where you can find information about the
hardware, software, and firmware versions.
Download
Downloads stimulation file to the connected STG (only available if STG
has active computer connection).
Download
and Start
Downloads and starts stimulation file to the connected STG (only available
if STG has active computer connection).
Start
Starts downloaded stimulation file (only available if STG has active
computer connection).
Stop
Stops downloaded stimulation file (only available if STG has active computer
connection).
9.4 Shortcut
Keys
Shortcut keys offer you another way to accomplish common tasks. Using a shortcut key usually
consists of pressing and holding one key while pressing a second key.
See the list of shortcut keys available in the software.
Shortcut key
CTRL+C
Copy Row
CTRL+D
Download
CTRL+A
Download and Start
CTRL+N
Create New File
CTRL+O
Open File
CTRL+P
CTRL+R
Start
CTRL+S
Save file
CTRL+T
Stop
CTRL+V
Paste Row
CTRL+X
Cut Row
CTRL+Z
Undo