Multichannel Systems MEA2100-System Manual - Manual (Page 53)

49
7 Appendix
7.1 MEA2100 Configuration Software
The MEA2100 Configuration software is an add on program for changing the hardware filter
settings of the MEA2100. No firmware update is necessary.
Please install the MEA2100 hardware filter configuration software by clicking
the “MEA2100_Config.exe” file. Follow the on screen installation guide.
Main Window of the MEA2100 Configuration program
The MEA2100 Config program for changing the hardware filter setting of the MEA2100-System
is self-explanatory via tool tips. It is possible to control each headstage separately.
Define the “MEA2100 Device” from the drop down box if two headstages or headstages
with two MEAs are available. Press "Refresh" button to update the settings. The actual settings
for “High and Low Pass Filter” for the selected headstage are displayed. If the actual settings
are not on the drop down list, “Custom” will be displayed.