Multichannel Systems LTP-Director Manual - Manual (Page 42)

LTP-Director Manual
38
Measurement Mode
Click icon “Drug Application”. The “Drug Recording” dialog appears.
In this dialog you can label the three compounds of your choice in pump P1 to P3 and their
concentration for the report sheet. This information has no influence on the pump speed.
For the drug application phase, you can define the pump speed for all four pumps in the same
way as described before. These settings will be valid during the drug application phase and the
following phases until the “Washout” phase starts. During washout and all other experimental
phases, pump P4 (Ringer) for Ringer perfusion is running only, no compound is applied any
longer.