Multichannel Systems LTP-Director Manual - Manual (Page 11)

Welcome to the LTP-Director
7
Click “Hardware” tab in main menu "Settings" in the first instance of LTP-Director and select the
MEA2100. You can adjust the input voltage range and the sampling frequency for both connected
headstages and each of the 60-electrodes MEA.
In MEA2100-Systems the “Amplifier Gain” is automatically set, depending on the version
of the hardware.
Please select the “Input Voltage Range” and the “Sampling Frequency” according to the
requirements of your experiment. For slice recordings, a sampling frequency of 10 kHz
and an input voltage range of +/-10 mV is usually suitable.