Multichannel Systems LTP-Director Manual - Manual (Page 27)

Welcome to the LTP-Director
23
4.4
About the LTP-Analyzer Program
The second part of the software package is the LTP-Analyzer for offline analysis of data,
generated in measurement mode of LTP-Director.
Parallel to the software concept of LTP-Director, the LTP-Analyzer software also works in two
modes and with similar designed dialogs and data displays.
The two modes of LTP-Analyzer are the Raw Data Mode for reviewing raw data of all electrodes,
and the Analysis Mode for analyzing data of selected electrodes.
4.4.1 Raw Data Mode
In the same way as in the LTP-Director, up to four electrodes can be selected in LTP-Analyzer
Raw Data Mode. The electrode raw data can be reviewed sweep by sweep. It is also possible
to switch between the different phases of the experiment. Please see chapter "Data Display
Raw Data Mode" for detailed information.