Max Machinery 120 FLOW RATE & TOTAL INDICATOR - Manual (Page 17)

120-200-350 © 1993 (Rev 5/97) Max Machinery, Inc. Page 17
RESET KEY & CONTROL INPUT REFERENCE
Reset Key
The Reset key is programmable to perform different tasks for the totalizer and rate meter
functions of the unit. The Reset key can perform one task under each of the two major
control functions shown below. The following table lists the tasks that can be selected. The
boxes to the left are to mark your current settings.
Control Inputs
There are five control inputs which can be programmed to any of the functions shown in the
chart below. An input can be assigned up to two tasks but only one task can be assigned
under each of the two control functions shown below. The following table lists the tasks that
can be selected.
RESET KEY & CONTROL INPURT REFERENCE
None
Unlatch Hi/Lo Alarms
None
Reset Count
Unlatch Output
Reset & Unlatch
RATE TOTAL
RESET KEY CONTROL FUNCTION
CONTROL
INPUT
RATE TOTAL
CONTROL FUNCTION
None
Reset Count
Unlatch Output
Reset & Unlatch
1
None
Reset Count
Unlatch Output
Reset & Unlatch
2
None
Reset Count
Unlatch Output
Reset & Unlatch
3
None
Reset Count
Unlatch Output
Reset & Unlatch
4
None
Reset Count
Unlatch Output
Reset & Unlatch
5
None
Unlatch Alarms
None
Unlatch Alarms
None
Unlatch Alarms
None
Unlatch Alarms
None
Unlatch Alarms