Mallory Ignition Mallory COMP STARTER User Manual
Page 4
4
MALLORY IS A DIVISION OF THE MR. GASKET PERFORMANCE GROUP
550 MALLORY WAY, CARSON CITY, NEVADA 89701
(775) 882-6600
FAX (775) 887-4326
www.mrgasket.com
FORM #1434
(REV. C) 1/00
Made in U.S.A.
Printed in U.S.A.
Starter Shims
When using a starter that bolts to the engine block, it is sometimes necessary
to shim the starter to get smooth engagement. If the starter grinds (does not
engage ring gear smoothly) when the key is turned, shims may be required.
Mallory Comp
®
Starters are designed to use the stock type shims available at
any auto parts store. Start with the thinnest shim. Do not use any more shims
than necessary to get smooth engagement. No more than .093" of total shims
should ever be used. If the starter still does not engage smoothly, check the
ring gear teeth for damage.
NOTE: If the starter engages the ring gear but is noisy while turning
the engine over, too many shims are being used or the ring gear/pin-
ion gear is damaged.
- Mallory ELECTRIC FUEL PUMP TROUBLESHOOTING GUIDE (2 pages)
- Mallory MAX-FIRE AND E-FIRE ELECTRONIC DISTRIBUTORS 2248214_2248204_2255104_2255404_2256704 (8 pages)
- Mallory COMP 9000 90 SERIES POINT TYPE DISTRIBUTOR (3 pages)
- Mr_Gasket ELECTRIC (MICRO) DIESEL FUEL PUMP 12D (4 pages)
- Mallory ENGINE MODIFICATIONS FOR O-RING DISTRIBUTORS (1 page)
- ACCEL AFTERBURNER SWITCHABLE COIL 140025 (4 pages)
- ACCEL DUAL TOWER COILS 140403/140403S/140404/140404S (2 pages)
- ACCEL COIL KIT 140405 (2 pages)
- ACCEL COIL KIT 140408, 140408BK, 140408CH (1 page)
- Lakewood safety bellhousing 15060 (5 pages)
- Lakewood Safety Bellhousing 15100/15120 (4 pages)
- ACCEL Battery Eliminator 151308 (1 page)
- Lakewood Safety bellhousing 15210_15220 (2 pages)
- Lakewood safety bellhousing starter 15320_15330 (2 pages)
- LAKEWOOD DRIVE SHAFT SAFETY LOOP 18005 (2 pages)
- LAKEWOOD FRONT DRIVE SHAFT SAFETY LOOP 18023 (1 page)
- LAKEWOOD REAR DRIVE SHAFT SAFETY LOOP 18024 (1 page)
- LAKEWOOD REAR ANTI-ROLL BAR CENTER LINKS 19101 (1 page)
- ACCEL Exhaust Wrap 2002bk_2002ta (2 pages)
- ACCEL POINTS ELIMINATOR IGNITION MODULE PN 2005 (2 pages)
- ACCEL POINTS ELIMINATOR CONVERSION 2010 (3 pages)
- Lakewood subframe connector 30201_20102 (1 page)
- LAKEWOOD REAR LOWER CONTROL ARMS 20105 (2 pages)
- ACCEL VOLTAGE REGULATOR 201104 (1 page)
- ACCEL VOLTAGE REGULATOR 201107_201107C (1 page)
- Lakewood TOE LINKS 20141_20142 (1 page)
- Lakewood REAR TRAILING ARM 20143 (1 page)
- Lakewood REAR UPPER CONTROL ARMS 20144_20149_20154 (2 pages)
- Lakewood REAR UPPER CONTROL ARMS 20152 (2 pages)
- Lakewood COIL SPRING TRACTION BAR 20188 (2 pages)
- Lakewood TRACTION BARS 20189 (2 pages)
- ACCEL POINTS ELIMINATOR CONVERSION 2020 (3 pages)
- ACCEL POINTS ELIMINATOR CONVERSION 2030 (3 pages)
- Lakewood Bolt-on Ladder Bars 20460 (1 page)
- Lakewood Competition Bolt-on Ladder Bars 20462 (1 page)
- Lakewood watts link 20505 (2 pages)
- Lakewood REPLACEMENT HARDWARE KIT FOR 20536 LADDER BARS (1 page)
- Lakewood REAR UPPER CONTROL ARMS 21101_21102_21103 (2 pages)
- Lakewood SUSPENSION BARS 21150 (2 pages)
- Lakewood Qwik Links 21200_21201_21202 (1 page)
- Lakewood LIFT BARS 21312_21313 (4 pages)
- Lakewood LIFT BARS 21314 (4 pages)
- Lakewood LIFT BARS 21700 (4 pages)
- Lakewood traction bars 21715 (2 pages)
- Lakewood traction bars 21720 (2 pages)