Luminex xPONENT for MAGPIX IVD - Manual (Page 7)

Detailed instructions on how to install the MAGPIX System are provided in the PC Installation
Instructions (89-30000-00-263) and Installing MAGPIX (89-30000-00-236) foldouts that you
received with the instrument.
This manual provides step-by-step instructions on how to start your MAGPIX system for the
first time, how to perform daily operations, and how to properly maintain the instrument.
WARNING: Improper installation or use of the MAGPIX System can result in
injury, damage to the instrument, and/or incorrect results.
Before installing or using MAGPIX you must complete the
training modules located in the Training tab at http://
www.luminexcorp.com/MAGPIX
Additional "How-To" videos describing specific operations can
be found on the same page under the Support tab.
Starting xPONENT
Perform the following steps if xPONENT does not launch automatically after you turn on the
computer.
• On the PC desktop, click the Luminex xPONENT icon, or click Start > All Programs >
Luminex > xPONENT > Luminex xPONENT
• If you have a trial license, click OK in the dialog box that opens.
• If this is the first time you have started the software, the User License Agreement may
display. Read the license agreement. Select I accept the terms of this license
agreement, then click OK.
NOTE: For safety and legal information, refer to the Hardware User Manual
and the Software User Manual that you received with your
instrument.
Start-up Indicators
Chapter 1: Starting the MAGPIX System
for the First Time
1