Luminex 200 User Manual with IS 2.3 Software User Manual
Page 2
© LUMINEX CORPORATION, 2001-2005. All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, or translated into any language or computer language, in any form or by any means
without prior express, written consent of:
LUMINEX CORPORATION
12212 Technology Boulevard
Austin, Texas 78727-6115
U.S.A.
Voice: (512) 219-8020
Fax: (512) 219-5195
Luminex
®
200™ System User Manual
PN 89-00002-00-144 Rev. B
October 2005
Luminex Corporation (Luminex) reserves the right to modify its products and services at any time. This guide
is subject to change without notice. Although prepared to ensure accuracy, Luminex assumes no liability for
errors or omissions, or for any damages resulting from the application or use of this information.
The following are trademarks of Luminex: Luminex, Luminex 100, Luminex 100 IS, Luminex 200, LabMAP,
xMAP, LumAvidin, Luminex XYP, Luminex SeroMAP, Luminex FlexMAP, and Luminex SD. All other trade-
marks, including Windows, Cheminert, Pentium, and Dell
are trademarks of their respective companies.
The Luminex 100 IS software uses the VideoSoft
®
VsFlexGrid Pro 7.0, VsPrinter 7.0, and VsView 3.0
ActiveX controls, which are copyrighted by VideoSoft, 2001.
The contents of this manual and the associated Luminex software are the property of Luminex and are
copyrighted. Except as specified in the End User License Agreement, any reproduction in whole or in part is
strictly prohibited.
EC
REP
Paul. A. Rowden
33 Stapleford Road
Middlesbrough
Cleveland TS39ES
England
([email protected])