Luminex 200 User Manual with IS 2.3 Software - Manual (Page 11)

PN 89-00002-00-144 Rev. B 1 - 1
Safety
Please become familiar with the information in this chapter before
using the equipment. Do not perform procedures on your Luminex
®
200 TM system that are not specifically contained in this manual,
unless you are directed to do so by Luminex Technical Support.
Intended Use
The Luminex 200 system is designed to perform a wide range of
xMAP technology-based laboratory tests, measuring biomolecular
reactions on the surface of xMAP microspheres. The system is
intended For In-Vitro Diagnostics Use.
For export only.
Warnings and Notes
Informational notes and warnings appear in this manual.
Note: A note provides general helpful information. No safety or
performance issues are involved.
Caution: This message is used in cases where the hazard is minor or
only potential hazard is present. Failure to comply with the caution
may result in potentially hazardous conditions.
Warning: This message is used in cases where danger to the
operator or to the performance of the instrument is present. Failure to
comply with the warning may result in incorrect performance,
instrument failure, invalid results, or hazard to the operator.
Danger: This message is used in cases where significant risk of
serious injury or death is present.
1