Luminex 200 Installation Guide - Manual (Page 24)

code reader. The Luminex 200 complies with IEC 60825-1 and 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
The following label appears on the back of the Luminex 200 instrument.
FIGURE 6. Laser Radiation Caution Label
WARNING: Under NO circumstances should you remove the Luminex 200
analyzer cover! When performing routine maintenance, turn
power to the Luminex 200 analyzer OFF and the disconnect the
power cord.
All laser apertures are located within the Luminex 200 analyzer and are contained within a
protective housing.
This label appears on the optics cover within the Luminex 200 analyzer.
In Vitro Diagnostic Use Safety Precautions
13