Luminex 200 Installation Guide - Manual (Page 15)

• Classification control microspheres (CON1)
• Reporter control microspheres (CON2)
For xPONENT 3.1:
Calibration and Verification Kits
For both:
xMAP Sheath Fluid
Required Laboratory Reagents
The following items are necessary to run the Luminex 200 system.
They are not provided by Luminex.
• Household bleach
• 70% isopropanol or 70% ethanol
• Mild detergent
• Distilled water
Luminex Software
Luminex software provides complete control of the system and performs data analysis. The
PC accompanying your system is preloaded with the Luminex software. However, we supply
a software CD should you need to reinstall the software.
This software requires a dedicated system. Unauthorized additional software is prohibited
and may result in improper operation of the system.
Luminex ® 200 ™ Installation Manual
4
In Vitro Diagnostic Use