Luminex 200 Installation Guide - Manual (Page 20)

Read the following safety information before setting up or using the Luminex 200 system. A
user should be present during operation. This system contains electrical, mechanical, and
laser components which, if handled improperly, are potentially harmful. In addition, biological
hazards may be present during system operation. Therefore, we recommend that all system
users become familiar with the specific safety advisories below, in addition to adhering to
standard laboratory safety practices. The protection provided by the equipment may be
impaired or the warranty voided if the system is used in a manner not specified by the
instructions or by Luminex Corporation. Various informational labels appear on the back of
Luminex system components. Refer to the Luminex System User Manual for more details
about the labels.
This caution label appears on the back of the Luminex 200 analyzer and on the Luminex XYP
instrument.
FIGURE 1. Fuse Caution Label
Chapter 5: Safety Precautions
9