Magnum Venus Plastech RT-3000 PRO GUN CHOP TRIGGER - Manual (Page 18)

RT-3000 Remote Trigger Manual
Rev. 12/2012 Page | 18
Gun Control:
8.
Mark both ends of the poly tube appropriately and put one end through the inner
guard and slide the hose clamp onto the tube and then attach it to the #2 barb
fitting (Gun “ON” signal). (see diagram above)
9.
Attach the other end into the fitting located at the front of the Pro Gun. (see
drawing below)
10. Mark both ends of the poly tube appropriately and put one end through the inner
guard and slide the hose clamp onto the tube and then attach it to the #4 barb
fitting (Gun “OFF” signal). (see diagram above)
11. Attach the other end to the fitting located at the back of the Pro Gun. (see
drawing below)
Auto Pro Gun
Solvent Purge (Flush):
12. Mark both ends of the poly tube appropriately and put one end through the inner
guard and slide the hose clamp onto the tube and then attach it to the #3 barb
fitting (Solvent Purge). (see diagram above)
13. Push the other end onto the fitting located at the auto flush button on the gun.