Impulse 8112 - Manual (Page 6)

Before You Get Started
What’s Included
All SeaDAC modules are shipped with the following items. If any of these items is
missing or damaged please contact Sealevel for a replacement.
SeaDAC Lite Digital Interface Adapter
Item# CA356 – USB Type A to SeaLATCH Type B Cable, 6’ in Length
Sealevel Software CD – SeaMAX Software and Documentation
NOTE: SeaDAC Lite iPorthole and OEM modules do not include an
internal USB cable. Order the appropriate internal cable for your
system, or use Molex connector p/n# 35507-0400 or equivalent.
Optional Items
Depending upon your application, you are likely to find one or more of the following
items useful for interfacing SeaDAC Lite modules.
All items can be purchased from our website (
http://www.sealevel.com ) or by calling
864-843-4343. For applicable accessories, pin out diagrams are located on the
website.
CA332 – SeaLATCH Type A to SeaLATCH Type B device cable, 6’ in length
CA179 – USB A to B device cable, 6’ in length
CA214 – USB A to A extension cable, 3 meters
CA260 – 2mm Molex to 1x4 0.1” (2.54mm) box header cable, 14” in length.
Used to connect iPorthole and OEM modules to the internal USB header found
on many popular system motherboards.
CA382 – 2mm Molex to 2mm Molex cable, 14” in length. Used to connect
iPorthole and OEM modules to the internal USB header on Sealevel embedded
USB hubs and computers.
CA383 – 2mm Molex to 1x4 2mm box header cable, 14” in length. Used to
connect iPorthole and OEM modules to the internal USB header found on many
popular system motherboards.
HUB7i – Sealevel’s powered 7-port USB hub providing up to 5500 VAC of
optical isolation to the host system.
HUB4 – High Speed USB 2.0 4-Port Hub − AC powered 4-port USB hub, AC
adapter, and USB cable.
HUB7 – High Speed USB 2.0 7-Port Hub − AC powered 7-port USB hub, AC
adapter, and USB cable.
© Sealevel Systems, Inc. - 4 - SeaDAC Lite User Manual