Before you get started, Card setup – Impulse ACB-104.ULTRA (3514) User Manual
Page 4
© Sealevel Systems, Inc.
- 2 -
ACB-104.ULTRA User Manual
Before You Get Started
What’s Included
The ACB-104.ULTRA is shipped with the following items. If any of these items is
missing or damaged please contact Sealevel for replacement.
ACB-104.ULTRA Adapter
PC/104-Plus Mounting Hardware
Sealevel SeaI/O Software CD
Optional Items
Depending upon your application, you are likely to find one or more of the
following items useful for interfacing the ACB-104.ULTRA to real-world signals.
All items can be purchased from our website (
calling 864-843-4343.
CA-118 – Provides an 8” ribbon cable with an IDC26 connector to a DB-25
Male connector.
CA-178 – A 6’ shielded cable with a DB-25F connector to an ITU-T ISO-2593
style connector (V.35), and converts the Sealevel DB-25 implementation to the
ITU-T V.35 mechanical standard.
CA-104 – A 6’ extension cable with one DB-25M connector and one DB-
25Fconnector, pinned one-to-one, for use with RS-232 and RS-530.
CA-107 – A 10” shielded cabling adapter with a DB-25F (RS-530) to a DB-
37M (RS-449 DTE). RS-530 is replacing RS-449 in Telecom applications, but
there is still a very large installed base of equipment that still uses the RS-449
pin-out. Both standards use RS-422 to define the electrical specifications and
are interchangeable via this adapter cable.
CA-159 – A 6’ shielded cable with a DB-25F (RS-530) to a DB-15M (X.21),
and converts the standard DB-25 implementation of RS-530 or RS-422 to the
ITU-T X.21 standard.