Impulse SCMXIF - Manual (Page 11)

SCM7B
Visit our website www.dataforth.com 97
Isolated Process Control Signal Conditioning Products
SCM7B
SCM7BPT
Non-Isolated Pass Thru Module
Description
The SCM7BPT is a non-isolated signal pass-thru module which shorts together
the signal inputs-to-outputs.
SCM7B-PROTO
Breadboard Kit
Description
The SCM7B-PROTO breadboard kit was designed to allow users to incorpo-
rate their own module functions using an SCM7B format. The kit includes a pc
board designed for breadboard circuits, a module case, header and mounting
screw. Contact the factory for additional information.
Figure 20: SCM7BPT
The following is a list of parts that are available for use with your SCM7B system,
or for fabrication of your own backpanel, along with manufacturer’s part number.
Dataforth makes no claim as to availability and/or quality of parts purchased from
vendors other than Dataforth.
Part Description
Part Number Manufacturer
CJC Thermistor 100K6A1 Betatherm Corp.
DC95G104W Thermometrics
Diode Transient Absorber SA series General Semiconductor
Sockets for SCM7B pins 50865-5 Amp Incorporated
Module retaining screw KSF2-440 ET PEM Engineering
captive nut, 4-40 thread
Grounding Stud, 0.625",
KFH 10-32-10 PEM Engineering
10-32 thread
Part Description
Part Number Manufacturer
Axial Fuse PICO II series Littlefuse
2 position termination block MKDS5/2-6,35 Phoenix Contact, Inc.
3 position termination block MKDS5/3-6,35 Phoenix Contact, Inc.
DB25 (male) PCB connector 745078-3 AMP Incorporated
DB25 (female) ribbon 745078-5 AMP Incorporated
connector (for custom cables)
0.062" PCB Standoff
647A-5015-19 Concord
0.094" PCB Standoff 647A-5023-19 Concord
Additional Part Numbers of Interest