Controlled Products Systems Group 9150-080 - Manual (Page 7)

Important Safety Instructions
WARNING - To reduce the risk of injury or death:
1. READ AND FOLLOW ALL INSTRUCTIONS.
2. Never let children operate or play with gate controls. Keep the remote control away from
children.
3. Always keep people and objects away from gate. NO ONE SHOULD CROSS THE PATH
OF THE MOVING GATE.
4. Test the operator monthly. The gate MUST reverse on contact (contact sensors must be
installed) with a rigid object or stop or reverse when an object activates the non-contact
sensors. After adjusting the force or the limit of travel, retest the gate operator. Failure to
adjust and retest the gate operator properly can increase the risk of injury or death.
5. Use the emergency release only when the gate is not moving.
6. KEEP GATES PROPERLY MAINTAINED. Read the owner's manual. Have a qualified
service person make repairs to gate hardware.
7. The entrance is for vehicles only. Pedestrians must use separate entrance.
8. SAVE THESE INSTRUCTIONS!
Gate Construction
Vehicular gates should be constructed and installed in accordance with ASTM F2200; Standard
Specification for Automated Vehicular Gate Construction. For a copy of this standard, contact ASTM
directly at 610-832-9585; [email protected]; or
www.astm.org .
9150-065-D-5-07 Page 7