Controlled Products Systems Group 1601-080 - Manual (Page 5)

1601-065-G-6-12 3
1602 SPECIFICATIONS
3-Piece 20 Ft. Wood Arms Only P/N 1602-340
3-Piece 20 Ft. Wood Arms Mounting Kit P/N 1602-041
Foam Padding for 14 Ft. Arm P/N 1601-260
3-Piece 20 Ft. Aluminum Arm Kit P/N 1602-162
3-Piece 24 Ft. Aluminum Arm Kit P/N 1602-164
3-Piece 27 Ft. Aluminum Arm Kit P/N 1602-166
(All hardware included in kits)
Foam Padding for 14 Ft. Arm P/N 1601-260
1602 Barrier Arm Kit Options
1602 Housing
Drawings not to scale
Class of Operation
Model 1602 - UL 325 Class III, IV – ETL Listed
Type of Gate
Wide Traffic Lane Vehicular Barrier Gate Only
Arm Types
Wood/Aluminum 3-piece counter-balanced assembly
Gate Cycles
Low Cycle
Primary Entrapment Protection
Inherent entrapment sensing system (Type A)
Secondary Entrapment Protection
Provision for connection of a non-contact sensor
(Type B1) and/or contact sensor (Type B2)
15.26”
39.6”
34.5”
15.74”
CLASS
CERTIFIED TO CAN/CSA C22.2 NO. 247
CONFORMS TO ANSI/UL-325
VEHICULAR GATE OPERATOR HP
53382
MODEL
SERIAL
VOLTS PHASE
AMPS 60 Hz MAX GATE LOAD
DoorKing, Inc., Inglewood, CA
13”
Model #
Max Arm
Length
Horsepower - Volts
1 HP - 115 VAC
1 HP - 230 VAC
1 HP - 460 VAC
1 HP - 115 VAC
1 HP - 230 VAC
1 HP - 460 VAC 1602-080
1602-082
1602-084
1602-081
1602-083
1602-085 28 Ft.
28 Ft.
28 Ft.
28 Ft.
28 Ft.
28 Ft.
Speed
90°
5.5 Sec
5.5 Sec
5.5 Sec
5.5 Sec
5.5 Sec
5.5 Sec
Amp
9.7
4.9
2.5
9.7
4.9
2.5
Convenience
Open
No
No
No
Yes
Yes
Yes
Use this manual for the Model 1602 operators with circuit board 1601-010 Rev V or higher ONLY.