Controlled Products Systems Group SK-1323-SDQ - Manual (Page 3)

ENFORCER Outdoor Stand-Alone Keypads
SECO-LARM U.S.A., Inc 3
LED & Audible Indicators
Optical Tamper
Audible Tones Keypad Status
1 Long tone Confirmation
1 Short tone Key press
2 Short tones Invalid entry
3 Short tones User code/card denied
Constant short tones Alarm triggered
6 short + 1 long tone All user codes deleted
No tone when key is pressed Wrong code lockout
Left LED Right LED Keypad Status
OFF Green Power ON
OFF Orange Programming Mode
Green Orange flashing Waiting to program code/card* (card+code access mode)
Red Orange flashing Code/card* already present
Green Green Relay 1 activated
Red Green Relay 2 activated
Orange Green Relay 1 and 2 both activated
Orange Orange Restoring factory defaults
Green flashing Green Waiting for code/card entry* (card+code access mode)
OFF OFF Power OFF / Clearing user codes
There is an optical tamper on the rear of each unit. If the sensor detects light, the tamper alarm will sound. For
information on how to program the optical tamper, please see page 13, Programming the Optical Tamper.
SK-2323 Series SK-1323 Series
Rear Rear
Optical
tamper
Parts List
1x Keypad
1x Manual 4x Mounting screws
4x Screw anchors 1x Metal oxide
varistor (MOV) 1x Security screw
1x Torx wrench
*Card operation with SK-2323-SPQ
and SK-1323-SPQ only.
1x Mounting template
1x Diode
Dimensions
SK-2323 Series SK-1323 Series
6”
(152mm)
15 /
16
” (24mm) 1 3 /
4
” (44mm)
3 5 /
16
”
(84mm)
3 9 /
16
”
(90mm)
3 5 /
16
”
(84mm)
3 9 /
16
”
(90mm)
2” (50mm)
3” (76mm)
4 3 /
4
”
(120mm)
7 /
8
” (22mm)
1 3/16 ” (30mm)