Introduction, Reference documents, Introduction 1.1 r – CTI Products TIB TSAM Interface User Manual
Page 6: Eference, Ocuments, 1 reference documents, Figure 1 - tib front and rear view
TIB Hardware Reference
Introduction
CTI Products, Inc.
68-10911-100
1
1. Introduction
The TSAM Interface Module (TIB) is a member of the Monitoring and Control
Network (MCN™) family of auxiliary modules. Hardware specifications, special
installation, and configuration information are described in this manual.
The TIB module is a control module that interfaces between a CIB module and
CTI Product’s Transmitter Steering Audio Matrix (TSAM). This interface
provides monitor and control of transmitter sites from a PC with a HIB as the
Operator Interface Module. The CIB is the only Comparator I/O Module that
operates with the TIB and the HIB is the only User Interface Module that operates
with a TIB.
The TIB is used in systems that have multiple transmitters, with each transmitter
associated with one or more receivers and that use the TSAM to provide steering
for the transmitter sites. The TIB will translate a FORCE VOTE command for a
particular receiver into a FORCE TX command that commands the TSAM to steer
to the transmitter associated with the receiver being FORCE VOTED. The TIB
can also monitor the TSAM for the active transmitter site for display on a PC.
NOTE: See reference 3 for a description of TSAM operation.
89
7
AB
C
D
EF0
12
3
4
5
6
89
7
AB
C
D
EF0
12
3
4
5
6
89
7
AB
C
D
EF0
12
3
4
5
6
CA-80023-100
RESET
DC IN
OPTION
IN
OUT
NETWORK
PRODUCTS, INC.
MODULE
GROUP
1 2 3 4
ON
PWR
ACT
ERR
J1
E1 A
E1 B
Figure 1 - TIB Front and Rear View
1.1 Reference
Documents
1. Monitoring and Control Network System Manual
Part Number S2-60425
2. Comparator I/O Module (CIB) Hardware Reference Manual
Part Number S2-60426
3. Transmitter Steering Audio Matrix Installation & Maintenance Manual
Part Number S2-60447