Ashly System II - Manual (Page 20)

Operating Manual - PROTEA SYSTEM II Digital Audio Products
ASHLY AUDIO INC. 847 Holt Road Webster, NY 14580-9103
Phone: (716) 872-0010 Fax: (716) 872-0739
Toll Free (800) 828-6308 Internet: www.ashly.com

1999 by Ashly Audio Corporation. All rights reserved worldwide.
Digital Audio Products
4.24G Only Out MIDI
Multiple 4.24G (XLR or MIDI) Out Master on 1st
4.24G + Remote XLR Out MIDI
4.24G + Slaves XLR Out Master Out Out
Slaves + Remote XLR Out Out
4.24G + Slaves + XLR Out MIDI Out Out
Remote
PC + 4.24G RS-232 Out RS-232
PC + 4.24G + RS-232 In RS-232
Slaves XLR In Out
PC + 1 Slave RS-232 In Out
PC + Multiple RS-232 to 1st In In on 1st Slave
Slaves XLR to others In Out on others
PROTEA Rev 2 20 Printed in USA 12/99
PROTEA SYSTEM CONFIGURATION TABLE
A/D Limiter EQ Delay Limiter D/A
Meter
Display
Clip
Detector
Signal
Detector
Input Output
Gain
Reduction
Master Gain
Protea Audio Path
Block Diagram
* *
* There is only one limiter per channel,
which is switchable to either Pre or Post.
HPF
24dB/oct
LPF
24dB/oct
Shelves
(Parametric Only)
Clip Buss Clip Buss
4.24G Settings Slave Switch Settings
On Back Panel
System Data Data Config Master/MIDI/ Switch "A" Switch "B"
Configuration Connectors Switch On Back RS232 UserPref (Baud Rate) (Data Config)