Ashly XR2001 - Manual

XR-2001
The unit shall be a stereo three-way 24dB per octave electronic crossover
in a two rack space metal chassis. This same unit shall also be configurable
as a four-channel two-way electronic crossover. The unit shall have sepa-
rate front panel input level controls on all channels for interfacing with
broad range of nominal system levels. Unity gain operation must be
achievable by setting these controls at the “U” position. Each of the unit’s
channels shall have independent, infinitely variable adjustment of
crossover frequency with controls located on the front panel. This control
shall provide a total range of 200:1 when used in conjunction with the
unit’s adjacent RANGE switch. There shall be a RESPONSE control cali-
brated in decibels on each channel to adjust the dampng of that filter at
the crossover point, thus allowing variable system response adjustment to
specific site requirements. The unit shall have separate clip indicators to
monitor all internal amplifiers for any possible overload conditions. Each
channel of the crossover unit shall have a separate output level control
and mute switch located on the front panel. There shall be separate inputs
and outputs for each channel on 1/4” TRS phone jacks and XLR connec-
tors, any of which may be used balanced or unbalanced. In addition, there
shall also be an independent mono summed output labeled MONO LOW
OUT (on a separate 1/4” TRS jack and an XLR jack). The crossover must
be made in America and covered under a limited full Five Year warranty.
The shipping weight shall be ten pounds, with an overall depth of six
inches. The crossover shall be the Ashly model XR-2001, manufactured by
Ashly Audio Inc. of Rochester, New York. No other unit shall be accept-
able unless data submitted from an independent test laboratory verifies
that the above specifications are fully met or exceeded.
TECHNICAL NOTES & SPECIFICATIONS
ARCHITECTS SPECIFICATIONS
XR-2001 Stereo 3-Way/Mono 4/5-Way Crossover
Features:
•5-Year Worry-Free Warranty
• 24dB Per Octave Slopes
• Variable Filter Response Allows
Tuning-In Linkwitz-Riley or
Other Filter Performances
• Output Mute Switches
• XLR and 1/4” Inputs and
Outputs
• 20Hz Third Order Hi-Pass Filter
• Extra Wide Tuning Range
• Peak Overload Warning Lights
• Tamper-Proof Security Covers
Optionally Available