Ashly 1200 - Manual

PE-Series (Protea Enabled) amplifi ers are high-power, high-effi ciency, lightweight amplifi ers incorporating the latest
in power and control technologies. Each amplifi er can be controlled and monitored through the built-in Ethernet port
using Protea NE Software™. Protea NE NE NE gives users access to many features, including: input attenuation, channel mute, NE NE
channel polarity, input level, output voltage, output current, clipping, temperature, and power on/off.
The 800, 1200, 1800, 2400, 3000 and 3800 range in power from 400 watts to 1900 watts per channel at 4 ohms
(20Hz-20kHz, 0.05% THD). All models will drive 2, 4 or 8 ohm loads.
All amplifi ers are 2RU, weigh 20 pounds and utilize a state-of-the-art, effi cient, high speed switched mode power sup-
ply. Additionally, DC voltage control of the input level and remote power on/off are standard features.
Input connections are via XLR-1/4” Neutrik combo connectors and 6-pin Euroblock. XLR male connectors are also
provided for looping to additional amplifi ers. Output connectors are locking Neutrik Speakon and 4 position screw ter-
minal strip with safety cover. Switches on the rear panel include a selectable HPF (Out, 30Hz and 50Hz), Clip Limiter
(Off, Slow, and Fast), Input Ground Lift, Gain (26dB, 32dB and 1.4V) and Operation Mode (Stereo, Bridged Mono and
Parallel Mono).
Optional 32 bit/96kHz Protea NE DSP cards can be installed as needed. Protea NE NE NE DSP cards feature analog and digital NE NE
(AES/EBU) inputs, and two additional processed output channels to drive additional amplifi er channels.
When your next project requires high performance amplifi ers with superb sound, reliability, remote control and more,
Ashly Audio’s PE-Series of remote-controlled power amplifi ers have been designed to meet the needs of both portable
and installation applications.
POWER RATINGS
Power - Stereo Power - Mono Bridged Power - Parallel-Mono
Model 8 ohms 4 ohms 2 ohms 8 ohms 4 ohms 2 ohms
3800 1100W 1900W 1500W 3800W 3000W 3800W
3000 900W 1500W 1500W 3000W 3000W 3000W
2400 700W 1200W 1500W 2400W 3000W 2400W
1800 500W 900W 1400W 1800W 2800W 1800W
1200 300W 600W 1100W 1200W 2200W 1300W
800 200W 400W 700W 800W 1400W 800W
Specifi cations
Input Gain: selectable: 26 dB, 32 dB, or 1,4 V input sensitivity
SMPTE (typical): < 0,02% THD 20 Hz-20 kHz, 8 Ω load 3 dB below rated power THD+N (typ)
Total Harmonic Distortion: < 0,02% THD 20 Hz-20 kHz, 8 Ω load 3 dB below rated power
Frequency Response: 20 Hz-20 kHz, +/- 0,2 dB / 8 Hz-50 kHz, +0, -3 dB
Damping Factor: > 400
Input Impedance: 40 k Ω balanced
Fan: temperature dependent speed-controlled axial fan
Signal To Noise-Ratio: > 107 dB (unweighted), 20 Hz - 20 kHz, 8 Ω load > 110 dB (A-weighted)
Connectors, Switches and Dimensions:
Input:
Neutrik Combo XLR & 1/4”, 6-pin Euroblock, Link: XLR
Output: Neutrik Speakon, 4 position screw terminal
Control RJ-45 for Ethernet control, Euroblock for remote DC voltage level control/remote power on/off
Limiter: switchable peak-limiter
Ground-Lift: input ground-lift switch on back panel
Dimensions: 19.0”W x 3.5”H x 13.5”D (483 x 88,9 x 340 mm)
Weight: 20 lbs. (9 kg)
All specifi cation subject to change or improvement without notice. publication date 03/01/05
PRODUCT INFORMATION