Coast TX10 - Manual

TX10 Instructions:
Battery Installation
Turn the head of the light in a counter-clockwise direction to remove from body of the light.
Remove the battery cartridge.
Place three AAA batteries into the cartridge in the direction indicated on the cartridge.
Replace the cartridge in the light with the red end going in first.
Replace the tail cap and turn it clockwise to tighten it until it is fully closed.
On/Off Operation
The TX10 has separate switches for each of the four colors.
To activate the white light, press the black switch. The black switch is textured to allow
identification in the dark.
To activate the red light, press the red switch.
To activate the green light, press the green switch.
To activate the blue light, press the blue switch.