Coast PX20 - Manual

PX20 Instructions:
Battery Installation
Turn the head of the light in a counter-clockwise direction to remove from body of the light.
Remove the battery cartridge.
Place three AAA batteries into the cartridge in the direction indicated on the cartridge.
Replace the cartridge in the light with the red end going in first.
Replace the tail cap and turn it clockwise to tighten it until it is fully closed.
On/Off Operation
ThePX20 has separate switches for each of the two colors.
To activate the white light, press the gray or black switch, depending on the body color of the
light. This switch is textured to allow identification in the dark.
To activate the red light, press the red switch.