CNB INS1000 - Manual (Page 36)

XNET Network Video Server User’s Guide
System S/W
Upgrade
Upgrade the system software installed in the network camera
via the network. System software needed for the upgrade
can be downloaded from cnbtec’s home page.
Refer to [6.4. How To Upgrade Your XNET System]. Upgrade
Bootloader
Upgrade
Upgrade the bootloader installed in the network camera via
the network. Bootloader needed for the upgrade can be
downloaded from cnbtec’s home page.
Refer to [6.4. How To Upgrade Your XNET System].
Add PTZ File
Add a new PT driver software via the network. PT driver can
be downloaded from cnbtec’s home page.
Refer to [6.4. How To Upgrade Your XNET System].
Factory
Default
Setting
Re-initialize the network camera to factory default state.
By checking on a Radio button “Except Network
Configuration”, you can preserve the parameters for the
network. Checking on “All”, will return all the parameters to
factory default state.
Once XNET is re-initialized as factory default state, it
should be set-up again using IP-Installer.
System Reset
Perform remote reset by clicking the “CONFIRM” button.
All previous connections will be disconnected upon
reset. XNET does not resume the connections and the
users must re-connect to the server manually.
36 of 44