CNB INS1000 - Manual (Page 27)

XNET Network Video Server User’s Guide
Field/Button
Sub Field
/Button
Description
Sensor 1
Select sensor type. There are two types of sensors which are
Normal Open and Normal Close. Sensor Setup
Name Input logical name for the sensor.
It sets the condition of video transmission via FTP or E-mail.
The XNET supports 2 types of conditions which are mutually
independent.
Sensor
Select
Check to enable Sensor initiated capture. Video Capture
Condition
Motion
Detection
Select
Check to enable motion detection initiated capture.
Select a way of sending captured video. You can send captured
video through FTP or E-mail, or both.
By E-Mail
Check to send captured video by e-mail.
E-mail is sent to the Recv E-mail address.
Refer to [Section 5.3.]
Captured video data for E-mail consists of intra frames only in
consideration of the limited storage space for E-mail account.
FTP data contains entire video frames.
Captured
Video
Transmission
By FTP
Check to send captured video by FTP.
FTP is sent to the FTP Server. Refer to [Section 5.3.]
If the FTP server is not properly assigned in “Network
Configuration” mode, XNET ignores the video transmission
by FTP
SAVE Save the setup parameters.
27 of 44