CNB INS1000 - Manual (Page 24)

XNET Network Video Server User’s Guide
Administrator
Username
Admin ID. Default ID is “root”
Administrator
password :
Admin password. The default password is “dw2001”.
Administrator
Confirm
Password
Enter the password once more to confirm the password.
Add User
Username
Enter the user ID you want to add. Up to 100 users are
supported by XNET
Add User
Password
Enter the user password.
Add User
Attribute
You can set different system resource access capabilities for
each of the users.
z Attributes are Audio, Bi-directional Audio and Pan/Tilt
control.
z For example, if you want a specified user to hear the
audio from the XNET, check Audio in the check box.
User
Administration
User List
You can list “user ids” and “ their attributes” here.
z format : user id[A, BA, P] :
„ A – audio,
„ B – bi-directional audio,
„ P – pt(Pan/Tilt), attribute.
You can delete specific user by clicking the DELETE button.
YES
SAVE
If you want to restrict viewing access to the XNET, check at the
box left to Yes and click on Save. Users need to input ID and
password to connect to XNET in viewing mode in a pop up
window as shown below.
Figure 5-6. User Authentication in XNET
Authentication
for Viewing
If No, default
attribute
If you uncheck for the Authentication for Viewing, all users can
access the XNET with the same attribute set here. Checked
attributes are enabled. Click “Save” to save the attribute.
24 of 44