CNB SKB-21Z12F - Manual (Page 16)

◎ The menu items surrounded with < > always has its sub menu.
◎ For all menu level, to go into sub menu, press NEAR key.
◎ To go to up-one-level menu, press FAR key.
◎ To move from items to item in the menu use joystick in the UP/DOWN or LEFT/RGHT
General Rules of Key Operation for Menu DISPLAY SETUP
DISPLAY SETUP
CAMERA ID
PTZ INFORMATION ON
AUTO
☞
ACTION TITLE AUTO
◎ This menu defines Enable/Disable of OSD display
on Main Screen. If an item is set to be AUTO, the item
is displayed only when the value of it is changed.
• CAMERA ID [ON/OFF] ◎ To move from items to item in the menu, use joystick in the UP/DOWN or LEFT/RGHT.
◎ To change a value of an item, use UP/DOWN of the joystick in the controller.
◎ Press NEAR key to save values and Press FAR key to cancel values.
MAIN MENU
EXIT
BACK
PRESET LABEL AUTO
LANGUAGE ENGLISH
• CAMERA ID [ON/OFF]
• PTZ INFORMATION [ON/OFF/AUTO]
• ACTION TITLE [ON/OFF/AUTO]
• PRESET LABEL [ON/OFF/AUTO]
• LANGUAGE [ENGLISH/中文/한국어]
- Support English, Chinese, Korean
NORTH DIRECTION SETUP
• SYSTEM INFORMATION
- Displays system information and configuration.
• DISPLAY SETUP
- Enable/Disable of OSD display on Main Screen.
O C S
MAIN MENU
Compass Direction Setup
SPEED DOME CAMERA
>
>
☞
• NORTH DIRECTION SETUP
• AREA LABEL SETUP
- Set LABEL name.
• DOME CAMERA SETUP
- Configure various functions of this camera.
• SYSTEM INITIALIZE
- Initializes system configuration and sets all data to
factory default configuration.
◎ Set North to assign compass direction as criteria.
Move camera and press NEAR button to save.
>
EXIT
SET NORTH DIRECTION
┏ ┓
┗ ┛
MOVE TO TARGET POSITION
[NEAR :SAVE /
/FAR: : CANCEL ]
MENU PASSWORD SETUP
MENU PASSWORD SETUP
PASSWORD ENABLE ☞ OFF
• PASSWORD ENABLE [OFF/ON]
- Displays Password protection enabled/disabled.
AREA LABEL SETUP
◎ This menu defines Label related settings
PASSWORD ENABLE
BACK
EXIT
☞ OFF
• EDIT PASSWORD
-. Sets 0~8 digits password.
※ Factory default password is “11111111”. Failure to
correctly input password more than 5 times will display
KEY CODE message. Please contact retailer for the lost
of password or KEY CODE message.
◎ This menu defines Label related settings.
• DISPLAY [AUTO/ON/OFF]
• CLEAR AREA LABEL
- Default LABEL settings.
• EDIT SCENE
- edit area.
EDIT LABEL
AREA LABEL SETUP
DISPLAY AUTO
CLEAR AERA LABEL CANCEL
☞
30 31
p g
• EDIT LABEL
- Edit LABEL.
※ Area setting can be configured rightward only and
Image Flip will be OFF. After setting IMAGE Flip will
return to the original status.
BACK
EXIT