CNB SKB-21Z12F - Manual (Page 12)

• PWR UP ACTION : This function enables to resume the last action executed before
power down. Most of actions such as Preset, Pattern, Swing and Group are available for
this function but Jog actions are not available to resume
Other Functions OSD Display of Main Screen
LABEL12345 PRESET Action Title Preset Label
AREA01 A L b l this function but Jog actions are not available to resume.
• AUTO FLIP : In case that tilt angle arrives at the top of tilt orbit (90°), zoom module camera
keep moving to opposite tilt direction (190°) to keep tracing targets. As soon as zoom
module camera passes through the top of tilt direction(90°), images should be reversed
automatically and
F appears in screen. If this function is set to OFF, tilt movement range is
5° ~ 95°.
Remote Control Information ID:123 IRIS 25 IRIS Information
AREA01 Area Label
• PARKING ACTION : This function enables to locate the camera to specific position
automatically if operator doesn’t operate the controller for a while. The Park Time can be
defined as an interval from 1 minute to 4 hours.
• CAM ADJUST : WB(White Balance) and AE(Auto Exposure) can be set up independently
f h t Th 2 d "Gl b l" d & "L l" d Th Gl b l d
• P/T/Z Information : Current Pan/Tilt angle in degree, zoom magnification and a compass
direction.
CAM 1
F
CAM 1
15/4/x1/N
Image Flip
Camera ID
P/T/Z Information
Remote Control Information ID:123 IRIS 25 IRIS Information
for each preset. There are 2 modes, "Global" mode & "Local" mode. The Global mode
means that WB or AE can be set up totally and simultaneously for all presets in "ZOOM
CAMERA SETUP" menu. The Local mode means that WB or AE can be set up
independently or separately for each preset in each preset setup menu. Each Local WB/AE
value should activate correspondingly when camera arrives at each preset location. During
Jog operation, Global WB/AE value should be applied. All Local WB/AE value do not
change although Global WB/AE value changes.
• Camera ID : Current Camera ID(Address).
• Action Title : Followings are possible Action Titles and their meaning.
“SET PRESETxxx” When Preset xxx is stored.
“PRESETxxx” When camera reach to Preset xxx. change although Global WB/AE value changes.
• FOCUS MODE : This mode exchanges focus mode automatically between Manual Focus
mode and Auto Focus mode by operation. Manual Focus mode activates in preset
operation and Auto Focus mode activates during jog operation. With Manual mode at
presets, Focus data is memorized in each preset in advance and camera calls focus data in
correspondence with presets as soon as camera arrives at a preset. It should shorten time
• Preset Label : The Label stored for specific Preset.
“PATTERNx” When Pattern x is in action.
“SWINGx/PRESETxxx” When Swing x is in action.
“UNDEFINED” When undefined function is called to run.
to get focuses Focus mode changes to Auto Focus mode automatically when jog operation
starts.
• Image Flip : Shows that images are currently reversed by Auto Flip Function.
• Remote Control Information : This information shows current remote controller input value.
• IRIS Information : This information shows current iris value.
• Area Label : Indicate Label.
22 23