CNB SKB-21Z12F - Manual (Page 13)

◎ The menu items surrounded with < > always has its sub menu.
◎ For all menu level, to go into sub menu, press NEAR key.
General Rules of Key Operation for Menu DISPLAY SETUP
DISPLAY SETUP
C O
◎ This menu defines Enable/Disable of OSD display on
Main Screen. If an item is set to be AUTO, the item is
◎ To go to up-one-level menu, press FAR key.
◎ To move from items to item in the menu, use joystick in the UP/DOWN or LEFT/RGHT.
◎ To change a value of an item, use UP/DOWN of the joystick in the controller.
◎ Press NEAR key to save values and Press FAR key to cancel values. CAMERA ID
PTZ INFORMATION
BACK
ON
AUTO
LANGUAGE ENGLISH
displayed only when the value of it is changed.
• CAMERA ID [ON/OFF]
• PTZ INFORMATION [ON/OFF/AUTO]
• LANGUAGE [ENGLISH/中文/Korean]
- Support English, Chinese, Korean.
• AREA LABEL SETUP
• SYSTEM INFORMATION
- Displays system information and configuration.
• DISPLAY SETUP
MAIN MENU
SPEED DOME CAMERA
☞
EXIT - Set LABEL name.
AREA LABEL SETUP
- Enable/Disable of OSD display on Main Screen.
• DOME CAMERA SETUP
- Configure various functions of this camera.
• SYSTEM INITIALIZE
- Initializes system configuration and sets all data to
factory default configuration.
EXIT
◎ This menu defines Label related settings.
• DISPLAY [AUTO/ON/OFF]
• CLEAR AREA LABEL
- Default LABEL settings.
• EDIT SCENE
Edit
AREA LABEL SETUP
DISPLAY AUTO
CLEAR AERA LABEL CANCEL
☞
factory default configuration.
MENU PASSWORD SETUP
PASSWORD ENABLE [OFF/ON]
- Edit area.
• EDIT LABEL
- Edit LABEL.
※ Area setting can be configured rightward only and
Image Flip will be OFF. After setting IMAGE Flip will
return to the original status.
BACK
EXIT
MENU PASSWORD SETUP
PASSWORD ENABLE ☞ OFF
• PASSWORD ENABLE [OFF/ON]
- Displays Password protection enabled/disabled.
• EDIT PASSWORD
- Sets 0~8 digits password.
※ Factory default password is “11111111”. Failure to
correctly input password more than 5 times will display
24 25
BACK
EXIT
KEY CODE message. Please contact retailer for the lost
of password or KEY CODE message.