Osd manual – KT&C KPC-WDR7000NU User Manual
Page 31
30
8. OSD MANUAL
- MOTION DET : Motion detection and Face detection function.
① MOTION MODE : Enable user to set up ON/OFF.
② LEVEL : Enable user to setup a motion detect sensitivity (0~15).
③ FACE MODE : Enable user to set up ON/OFF.
④ LEVEL : Enable user to set up a face detect sensitivity (0~15).
⑤ V START : Mask Vertical start position.
⑥ V END : Mask Vertical end position.
⑦ H START : Mask Horizontal start position.
⑧ H END : Mask Horizontal end position.
⑨ INITIAL : Enable user to initialize setting of MOTION DETECT.
- DISPLAY : Enable user to set up a screen marking
of CAM ID, CAM TITLE, MOTION, FACE
① CAM ID : Enable user to set up output on
Camera ID screen.
② CAM TITLE : Enable user to set up output
in fixed CAM TITLE.
③ MOTION DETECT : Enable user to set up out
put of MOTION on the screen as MOTION
DET ON setting.
③ FACE DETECT : Enable user to set up out put of
FACE on the screen as FACE DETECT ON setting.
④ INITIAL : Enable user to initialize of DISPLAY menu.
8. FACTORY DEFAULT
: Enable user to reset all of the status as the factory default
Setting up using LEFT, RIGHT KEY.
9. EXIT
: Enable user to EXIT the OSD menu Setting up using LEFT, RIGHT KEY.
MOTION DET
>MOTION MODE ... ON
LEVEL
... 08
FACE MODE
... ON
LEVEL
... 07
V START
... 01
V END
... 06
H START
... 01
H END
... 10
INITIAL
RETURN
DISPLAY
>CAM ID
... OFF
CAM TITLE
... OFF
MOTION DETECT ... OFF
FACE DETECT ... OFF
INITIAL
RETURN