Ken Tool T601 (38601) CENTER POST TIRE CHANGING SYSTEM - Manual (Page 16)

16
Maintenance and Care of
your Tire Changing
System
1. Routinely oil the threaded center post with
any general purpose oil.
2. As you use your tire changing system, the
threaded center post may turn and retract into
the main body. You will have to unscrew it to
return to its proper height.
3. Routinely check tightness of mounting bolts to ensure tire changing system is
securely fastened.
4. Worn parts should be replaced. See replacement parts list for ordering information.
Warranty Information
The Ken-Tool Tire Changing System (Model #T600 and T601) is warranted for one year from
date of purchase. If this Ken-Tool Tire Changing System fails to give complete satisfaction
within one year from date of purchase, return it to your place of purchase for full warranty.
Ken-Tool will replace the unit or any component free (Ken-Tool reserves the right to
determine if the entire unit should be warranted.) Exception: The threaded mounting
shaft is a normal wear item and is not covered by warranty.